| Challenge 1/4" Drill Bit - Style A 2.5" STANDARD (PD14-2.5)
Drill Bit - Style A - 2 and 1/2 Inch Lassco - Spinnit - Challenge STANDARD Hollow Drills Bit with a 2-1/2" drilling capacity in 1/4" diameter. Style A - 2 and 1/2 Inch Lassco - Spinnit - Challenge STANDARD Hollow Drill Bits are also available in 5/16", and 3/8" diameter sizes. Style A - 2 and 1/2 Inch Lassco - Spinnit - Challenge PREMIUM Drill Bits which are made of a German Hardened Steel are available in 1/4", 5/16", and 3/8" diameter sizes. Style A - 2 and 1/2 Inch Lassco - Spinnit - Challenge STANDARD TEFLON Drill Bits, which are Standard Drill Bits, coated with Teflon for smoother drilling are available in 1/4", and 5/16" diameter sizes. Style A - 2 and 1/2 Inch Lassco - Spinnit - Challenge PREMIUM TEFLON Drill Bits which are German Hardened Steel Drill Bits coated with Teflon are available in 1/4", 5/16", and 3/8" diameter sizes.
An assortment of Drill Bits in various styles and diameters is also available: Style A - 2 Inch Lassco - Spinnit - Challenge STANDARD Hollow Paper Drill Bits are available in 3/16", 1/4", 5/16", 3/8", and 1/2" diameter sizes. Style A - 2 Inch Lassco - Spinnit - Challenge PREMIUM Paper Drill Bits which are made of a German Hardened Steel are available in 1/8", 5/32" 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", and 1/2"diameter sizes. Style A - 2 Inch Lassco - Spinnit - Challenge STANDARD TEFLON Paper Drill Bits, which are Standard Paper Drill Bits, coated with Teflon for smoother paper drilling are available in 3/16", 1/4", 5/16", 3/8", and 1/2" diameter sizes. Style A - 2 Inch Lassco - Spinnit - Challenge PREMIUM TEFLON Paper Drill Bits which are German Hardened Steel Paper Drill Bits coated with Teflon are available in 1/8", 3/16", 1/4", 5/16", 3/8", and 1/2" diameter sizes.
Style L - 1" Lassco Drill Bits with a 1" drilling capacity in 1/8", 3/16", 1/4", 5/16", 3/8" and 1/2" diameter sizes;
Style J - 1" - Drill Bits with a 1" drilling capacity in 1/8" and 1/4" diameter sizes for Martin Yale - LIHIT drills;
Style K - 2" Drill Bits with a 2" drilling capacity in 1/4" and 5/16" diameter sizes for Martin Yale /LIHIT drills;
Style B - 2" Drill Bits with a 2" drilling capacity in 1/4" and 5/16" diameter sizes for Lawson drills;
Style C - 2" Drill Bits with a 2" drilling capacity in 1/4" and 5/16" diameter sizes for Nygren Dahly drills.
Some Pointers and Tips on Drilling: USE A SHARP DRILL BIT AT ALL TIMES. Generally, a Drill Bit can be used for approximately four (4) hours of use before it needs to be sharpened. Apply light pressure when sharpening. Too much pressure may cause flaring of the tip which renders the Bit unusable. |
English
| 
Espanol
| 
Francais
| 
Deutsch
| 
Italiano |
