Spinnit 2 Inch Single Spindle E-Z Glide Table Paper Drill
| Contact Us | About Us | Store Policy | Purchasing Information | Shopping Cart | Site Map |   

 Paper Drill Store

  Product / Keyword Search :     
   Call 866-432-0042 / INT'L 1-718-859-0917
   Fax: 718-228-7476		We Will Match Any Current Web Advertised Price!    | English | Espanol | Francais | Deutsch | Italiano |   
   PRODUCT LINES
Home
Lassco EBM-2.1 - Spinnit 2 Inch Single Spindle E-Z Glide Table Paper Drill
Paper Drill Supplies
   SHIPPING INFORMATION
   PAYMENT INFORMATION
   AFFILIATES
   Binding Machine Store
   Carton Sealing Store
   Check Signer Store
   Currency Counter Store
   D.O.D Shredder
   Laminator Store
   Machine Advantage
   Mail Product Store
   Pallet Wrapping Store
   Paper Cutter Store
   Paper Drill Store
   Paper Folder Store
   Paper Punches Store
   Paper Shredder Store
   Shrink Wrap Machine Store
   Timestamp Store
   Vacuum Sealing Store

 Home -> Lassco EBM-2.1 - Spinnit 2 Inch Single Spindle E-Z Glide Table Paper Drill

Lassco EBM-2.1 - Spinnit 2 Inch Single Spindle E-Z Glide Table Paper Drill
Lassco EBM-2.1 - Spinnit 2 Inch Single Spindle E-Z Glide Table Paper Drill
PRODUCT ID # :
ID : 12691
AVAILABILITY : NEW FACTORY DIRECT
MSRP : $1195.00
INSTANT SAVING : -$120.00
YOU PAY ONLY :
$1075.00
GOVERNMENT/SCHOOL BUYERS/NOT-FOR-PROFITS : CALL FOR SPECIAL PRICING
MORE OPTIONSShow/Hide
View Large Product Image
View Buyer's Guide
Print This Product  (Acrobat Reader 6.0 Is Required)
Lease This Product
PRODUCT DESCRIPTIONShow/Hide
The Lassco Spinnit EBM-2.1 Bench Paper Drill or Table Top Paper Drill is the Lassco EBM-2 improved with the E-Z Glide table system allowing quick movement from hole to hole for multi-hole drilling. Four interchangeable hole patterns are included, with custom patterns available. The bench model, table top design makes it easy to place the unit almost anywhere in your workspace. A release lever is positioned on each side of the traversing table for right or left-handed operation. Some Pointers and Tips on Drilling: USE A SHARP DRILL BIT AT ALL TIMES. Generally, a Drill Bit can be used for approximately four (4) hours of use before it needs to be sharpened. Apply light pressure when sharpening. Too much pressure may cause flaring of the tip. (Once a Drill Bit has a flared tip, it becomes defective.) Three types of Drill Sharpeners are available. We recommend you purchase a sharpener and also an extra Drill Bit for each size that you use to insure you can finish a job in the event a Drill Bit breaks. USE A SHARPENING STONE to debur the outside cutting edge of the your Drill Bits for better performance. LUBRICATE DRILL BITS OCCASSIONALLY - use Drill-Ease or Spin-Eze. While the drill is running, simply touch the Drill-Ease stick to the Drill Bit or brush on the Spin-Eze. This will allow for a smoother cut. USE DRILL BLOCKS. When drilling, a Drill Bit must stop slightly above the drill block when lowered. Replace worn out drill blocks regularly to ensure proper drilling.
PRODUCT SPECIFICATIONShow/Hide
Product Length 13.00 in.
Product Width 24.00 in.
Product Height 26.00 in.
Product Weight 77.00 lbs.
Num. Of Spindles1 quantity
Max. Drill Capacity2 in.
Motor Strength.25 hp
Voltage115V volts
WARRANTY INFORMATIONShow/Hide
All Lassco products with the exception of consumables are warranted to the original purchaser against defects in materials and workmanship for a period of one (1) year from the date of shipment when used under normal operating conditions. This warranty includes parts and labor.
BACK TO TOP OF PAGE
All Rights Reserved By Paper Drill Store