| Lassco Spinnit-Challenge 3/16" Drill Bit - Style A 2" PREMIUM TEFLON (PD316PT-2)
Drill Bit - Style A - 2 Inch Lassco - Spinnit - Challenge PREMIUM TEFLON Hollow Paper Drill Bit with a 2" paper drilling capacity in a 3/16" diameter is a PREMIUM Paper Drill Bit coated with Teflon for smoother paper drilling. PREMIUM Paper Drill Bits are made of German Hardened Steel.
Style A - 2 Inch Lassco - Spinnit - Challenge STANDARD Hollow Paper Drill Bits are available in 3/16", 1/4", 5/16", 3/8", and 1/2" diameter sizes.
Style A - 2 Inch Lassco - Spinnit - Challenge PREMIUM Paper Drill Bits which are made of a German Hardened Steel are available in 1/8", 5/32" 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", and 1/2"diameter sizes.
Style A - 2 Inch Lassco - Spinnit - Challenge STANDARD TEFLON Paper Drill Bits, which are Standard Paper Drill Bits, coated with Teflon for smoother paper drilling are available in 3/16", 1/4", 5/16", 3/8", and 1/2" diameter sizes.
Style A - 2 Inch Lassco - Spinnit - Challenge PREMIUM TEFLON Paper Drill Bits which are German Hardened Steel Paper Drill Bits coated with Teflon are available in 1/8", 3/16", 1/4", 5/16", 3/8", and 1/2" diameter sizes.
An assortment of Paper Drill Bits in various styles and diameters is also available: Style A - 2.5" Lassco-Spinnit-Challenge Paper Drill Bits with a 2.5" paper drilling capacity in 1/4", 5/16", and 3/8" diameter sizes;
Style L - 1" Lassco Paper Drill Bits with a 1" paper drilling capacity in 1/8", 3/16", 1/4", 5/16", 3/8" and 1/2" diameter sizes;
Style J - 1" Paper Drill Bits with a 1" paper drilling capacity in 1/8" and 1/4" diameter sizes for Martin Yale - LIHIT paper drills;
Style K - 2" Paper Drill Bits with a 2" paper drilling capacity in 1/4" and 5/16" diameter sizes for Martin Yale /LIHIT paper drills;
Style B - 2" Paper Drill Bits with a 2" paper drilling capacity in 1/4" and 5/16" diameter sizes for Lawson paper drills;
Style C - 2" Paper Drill Bits with a 2" paper drilling capacity in 1/4" and 5/16" diameter sizes for Nygren Dahly paper drills.
Some Pointers and Tips on Drilling: USE A SHARP DRILL BIT AT ALL TIMES. Generally, a Drill Bit can be used for approximately four (4) hours of use before it needs to be sharpened. Apply light pressure when sharpening. Too much pressure may cause flaring of the tip which renders the Bit unusable. Drill Sharpeners are available and are recommended with purchase along with an extra drill bit. Sharpening stones are also recommended to debur the outside cutting edge of the drill bits for better performance. Use of Drill-Ease or Spin-Eze lubricant is required. Finally, purchase drill blocks to stop the drill bit after it penetrates the drilled material. |
English
| 
Espanol
| 
Francais
| 
Deutsch
| 
Italiano |
